Canon PowerShot A2100 IS User Manual

Also see for 3473B001: Brochure

Contents

Canon PowerShot A2100 IS User Manual Manual pdf 84 page image

84You can set the shutter speed to a range between 1 and 15 seconds toshoot long exposures. However, you should attach the camera to a tripod toprevent the camera from moving and blurring the image.Select ≈.● Set the mode dial to K and press them button.● Press the op buttons to select U.● Press the qr buttons to select ≈, thenpress the m button.Select the shutter speed.● After pressing the o button, press the qrbuttons to select a shutter speed, thenpress the m button.Confirm the exposure.● When you press the shutter buttonhalfway, the exposure for the selectedshutter speed will appear.≈ Shooting Long Exposures• The brightness of the image may differ from the brightness of the screenin Step 3 when the shutter button was pressed halfway.• When shutter speeds of 1.3 seconds or slower are used, images areprocessed to eliminate noise after being taken. A certain amount ofprocessing time may be needed before you can take the next shot.• It is recommended to set the [IS Mode] to [Off] when shooting with atripod (p. 111).If the flash fires, the image may be overexposed. If this happens, set theflash to ! and shoot.COPY