Canon PowerShot A2100 IS User Manual

Also see for 3473B001: Brochure

Contents

Canon PowerShot A2100 IS User Manual Manual pdf 71 page image

71You can change the tone of an image to sepia or black and white whenshooting.Select My Colors.● After pressing the m button, press theop buttons to select .Select an option.● Press the qr buttons to select an option,then press the m button.X The setting you select will display on thescreen.Custom ColorThe contrast, sharpness and color saturation in an image can be selectedand set from 5 different levels.● Select in Step 2 above and press thel button.● Press the op buttons to select an option,then use the qr buttons to select a value.● The more to the right, the stronger/deeperthe effect gets, the more to the left, theweaker/lighter the effect gets.● Press the l button to accept thesetting.Changing the Tone of an Image (My Colors)My Colors Off —Vivid Emphasizes the contrast and color saturation for a vividimpression.Neutral Tones down the contrast and color saturation for neutral hues.Sepia Sepia tones.B/W Black and white.Custom Color You can adjust the tone of the image to your preference.The white balance cannot be set in the and modes (p. 70).COPY