Changing Shooting Functions111Displaying the OverlayYou can display gridlines for vertical and horizontal guidance, or a 3:2 guideto confirm the printable area for L size or postcard size prints.● Select [Disp. Overlay], then press the qrbuttons to select an option.Changing the IS-Mode Settings● Select [IS Mode], then press the qr buttons toselect an option.Grid Lines A grid overlays the display.3:2 GuideGray areas appear at the top andbottom of the screen. These areaswill not print when printing on 3:2aspect ratio paper.Both Both grid lines, and the 3:2 guide willdisplay.• In mode, you cannot set [3:2 Guide] or [Both].• Grid Lines will not be recorded on the image.• The gray areas displayed with [3:2 Guide] are the areas that will not beprinted. The actual image recorded will include the portion in the grayareas.ContinuousImage stabilization is always on. Youcan confirm the result directly on thedisplay, which makes it easier tocheck the composition or focus.Shoot Only Image stabilization is only active atthe moment of shooting.PanningImage stabilization only counters upand down motion. This option isrecommended for shooting objectsmoving horizontally.• If camera shake is too strong, attach the camera to a tripod. It isrecommended to set the IS Mode to [Off] when the camera is fixed to atripod.• When using [Panning], hold the camera horizontally. Image stabilizationdoes not work when the camera is held vertically.COPY
