Points to Note About Turning Off the Main Power SwitchThis equipment does not have a main power switch, but it has only a leakage breaker.The power supply of this equipment operates in synchronization with ON/OFF of the power supply of the finisher.The leakage breaker detects overcurrent and power leakage.NOTE:Explain to the customer that the leakage breaker must be checked once a month.Leakage BreakerNotes Before ServicingCAUTION:At servicing, be sure to turn off the power source according to the specified steps and disconnect the power plug.CAUTION:Do not turn off the power switch when downloading is under way. Turning off the main power switch while downloading isunder way can disable the machine.Points to Note at CleaningCAUTION:When performing cleaning using organic solvent such as alcohol, be sure to check that the component of solvent isvaporized completely before assembling.Notes On Assembly/DisassemblyFollow the items below to assemble/disassemble the device.1. Disconnect the power plug to avoid any potential dangers during assembling/disassembling works.2. If not specially instructed, reverse the order of disassembly to reinstall.3. Ensure to use the right screw type (length, diameter, etc.) at the right position when assembling.4. To keep electric conduction, binding screws with washers are used to attach the grounding wire and the varistor. Ensure touse the right screw type when assembling.5. Unless it is specially needed, do not operate the device with some parts removed.6. Never remove the paint-locked screws when disassembling.Safety Precautions2
