93Shooting – Selecting Particular EffectsAdjusting the Tone (White Balance)When the white balance mode is set to match the light source, thecamera reproduces colors more accurately.The icons in parentheses are the ones on the display panel. (Shown onlywhen there is a difference between the display panel icon and LCD monitor/viewfinder icon.)Mode DialAWB ( ) Auto Settings are automatically set by the cameraDaylight For recording outdoors on a bright dayCloudy For recording under overcast, shady or twilight skiesTungsten For recording under tungsten and bulb-type 3-wavelength fluorescent lightingFluorescent For recording under warm-white, cool-white orwarm-white (3-wavelength) fluorescent lighting( ) FluorescentHFor recording under daylight fluorescent, ordaylight fluorescent-type 3-wavelengthfluorescent lighting( ) Flash For flash photography( ) Custom1 For setting a custom value with a white sheet ofpaper, etc., to obtain the optimal white balancefor the conditions. There are two custom values:custom1 and custom2.( ) Custom21 Press WB (TTTT on the omni selector).z The current white balance mode will appear on the display paneland the white balance setting menu will appear on the LCDmonitor (or in the viewfinder).Downloaded From camera-usermanual.com Canon Manuals
