Auto Mode (continued)54Reviewing an Image Right after ShootingReviewing the ImageAfter a photo is taken, the image appears on the LCD monitor (or inthe viewfinder) for two seconds. In addition, the image will keep ondisplaying regardless of the review duration setting if one of thefollowing operations is performed.zzzz Keeping the shutter button pressedThe image continues to appear on the LCD monitor as long as youkeep the shutter button fully depressed.If you turn the zoom ring toward telephoto at this time, the image willbe magnified and continue to display even after the shutter button isreleased. The magnified image will be reduced to the normal size byturning the zoom ring in the opposite direction. To let the camerareturn to Shooting mode, press the shutter button halfway.zzzz Pressing the SET button while the image is displayedThe image will continue to display even after the shutter button isreleased. You can magnify the image (and reduce it to the normalsize after that) by using the zoom ring. To let the camera return toShooting mode, press the shutter button halfway.6 Press the shutter button all the way (p. 41).z You will hear the sound of the shutter when the shutter activates.z The picture appears for two seconds on the LCD monitor (or in theviewfinder).z See page 206 for settings that can be changed in this mode.z With the Review function, you can change the length of timeimages appear on the LCD monitor (or in the viewfinder) aftershooting, or set it so they do not appear at all. (p. 56)Mode DialDownloaded From camera-usermanual.com Canon Manuals
