|
PIXMA iP8500 Specifications*1: Only for CD-R printing supported regionsTo the topType Desktop serial color bubble jet printerPaper feeding method Auto sheet feed (ASF, cassette, automatic duplex printing, CD-R printing*1 )Resolution 4,800 x 1,200dpi (Max.)ThroughputDraft StandardBlack (Fine Black) 17ppm 6.2ppmColor (Fine Color) 15ppm 5.1ppmPrinting direction Bi-directional, uni-directionalPrint width Max. 203.2mm (215.9mm in borderless printing)Interface USB 2.0 High Speed / USB Full SpeedASF stacking capacity Plain paper: Max. 13mm (Approx. 150 sheets of 65g/m2 paper)Paper weight 64 to 105g/m 2Detection functionsCover open, Presence of print head, Remaining ink amount (optical / dot count), Printing position, Paper presence, Paper endsensor, Waste ink amount, Internal temperature, Pick-up roller, Paper feed roller position, Carriage position, Head-to-paperdistance, Supported camera direct printing device, Presence of CD-R, Supported paper size for duplex printing, Opennig /Closing of paper output trayNoise during printing (Highestprint quality)- Highest print quality settings: Approx. 36dB- Quiet mode: 34dBEnvironmental requirementsDuring operation Temperature 5C to 35C (41F to 95F)Humidity 10%RH to 90%RH (no condensation)Non operation Temperature 0C to 40C (32F to 104F)Humidity 5%RH to 95%RH (no condensation)Power supplyPower supply voltage, frequency Power consumption Standby Power-offAC 100 to 120V, 50/60Hz Approx. 23W Approx. 1.0W Approx. 0.5WAC 220 to 240V, 50/60Hz Approx. 23W Approx. 1.0W Approx. 0.5WExternal dimensionsPrinter:With the paper support and output tray retracted: Approx. 453 (W) x 293 (D) x 170 (H)mmWith the paper support and output tray extended: Approx. 453 (W) x 537 (D) x 325 (H)mmWeight Approx. 7.3kg, not including print head and optional unitsRelated standards(Printer, Adapter)Electromagnetic radiance:VCCI, FCC, IC, CE Mark, Taiwan EMC, C-tick, CCC (EMC), Korea MIC, Gost-RElectrical safety:Electrical Appliance and Material Safety Law (DENAN), UL, C-UL, CB Report, GS, CE Mark, Gost-R, FT, SASO, CCC,SPRING, Korea EK, IRAM (Argentine)Environmental regulations:RoHS (EU), WEEE (EU), Korea Package Recycle Law, Green Point (Germany), Energy Star, Eco Mark, Law onPromoting Green PurchasingSerial number location On the chassis visible when the access cover is open with the power turned off.Remaining ink amount detection Available (automatic detection by optical method and dot count, enabled at default)Paper type detection Not availablePrint head alignment Available (automatic or manual alignment via driver utilities, or the Resume/Cancel button in Camera Direct Printing,automatic alignment at default)Type Single head with 8 removable ink tanks (each color)Print head 768 nozzles in 2 vertical lines per color (1,200 dpi), 2 pl ink droplet per nozzleInk color Dye-based black, cyan, magenta, yellow, photo cyan, photo magenta, red, greenInk tank BCI-6BK / C / M / Y / PC / PM / R / G (dye-based)Weight (Net) Print head, approx. 100 g (not including ink tanks, protective material, packing material)Supply method As a service part (not including ink tanks)Part number QY6-0055-0003 - 8 |
