2. CLEANING MODE AND AMOUNT OF INK PURGEDTo prevent printing problems due to bubbles, dust, or ink clogging, print head cleaning is performed before the start of printing(when the cleaning flag is on), except in the following cases:- Cleaning on arrival: Performed when the scanning unit (printer cover) is closed.- Manual cleaning / deep cleaning: Performed manually.Black: Pigment-based blackColor: Dye-based black, cyan, magenta, yellow, photo cyan, photo magentaCondition DetailsAmount of ink used(g)(in the normaltemperature/humidityenvironment)Est. required time(sec.)(not including thetime of opening thecaps)On arrival of themachine(All in sequence)First to third cleaning after shipped from theplant *1 .0.53 (Black)1.16 (Color)100Dot count cleaning(Black)When the specified number of dots are printedsince the previous Black cleaning.0.20 (Black) 35 (Black)Timer cleaning - 0 *2(Black only)If 24 to 60 hours have elapsed since theprevious Black cleaning till the start of thenext printing.0.20 (Black) 35 (Black)Timer cleaning - 1(Black only)If 60 to 96 hours have elapsed since theprevious Black cleaning till the start of thenext printing.Timer cleaning - 2(Black only)If 96 to 120 hours have elapsed since theprevious Black cleaning till the start of thenext printing.Timer cleaning - 3 *3(Black/Color)If 120 to 336 hours have elapsed since theprevious Black/Color cleaning till the start ofthe next printing.0.20 (Black)0.50 (Color)35 (Black)45 (Color)Timer cleaning - 4(All in sequence)If 336 to 504 hours have elapsed since theprevious Black/Color cleaning till the start ofthe next printing.0.57 (Black)1.00 (Color)80Timer cleaning - 5(All in sequence)If 504 to 720 hours have elapsed since theprevious Black/Color cleaning till the start ofthe next printing.80Timer cleaning - 6(All in sequence)If 720 to 1,080 hours have elapsed since theprevious Black/Color cleaning till the start ofthe next printing.80Timer cleaning - 7(All in sequence)If 1,080 to 2,160 hours have elapsed since theprevious Black/Color cleaning till the start ofthe next printing.1.27 (Black)1.00 (Color)85Timer cleaning - 8(All in sequence)If 2,160 to 4,320 hours have elapsed since theprevious Black/Color cleaning till the start ofthe next printing.1.95 (Black)1.00 (Color)90Timer cleaning - 9(All in sequence)If 4,320 to 8,640 hours have elapsed since theprevious Black/Color cleaning till the start ofthe next printing.1.95 (Black)1.00 (Color)90Timer cleaning - 10(All in sequence)If 8,640 or longer hours have elapsed since theprevious Black/Color cleaning till the start ofthe next printing.90At print headreplacementWhen the print head is removed and installed. 0.53 (Black)1.16 (Color)1002-3
