64 Routine MaintenanceCleaning Your MachineThis section describes the cleaning procedure that is needed to maintain your machine. Cleaning the Platen Glass and Document CoverMoisten a clean, soft, lint-free cloth and wring out excess water. With it, wipe the Platen Glass(A) and the inner side of the Document Cover (white sheet) (B). Then wipe with another clean,soft, dry, lint-free cloth, making sure not to leave any residue, especially on the Platen Glass. Cleaning the Paper Feed Rollers (Roller Cleaning)Clean the paper feed rollers if paper is not fed properly. Cleaning the paper feed rollers will wearthe rollers, so perform this only when necessary.1 Make sure that the machine is turned on, and then remove any paper from the AutoSheet Feeder and Cassette.2 Press the Paper Feed Switch to select the paper source to clean.Cautionz Be sure to turn off the power and disconnect the power cord before cleaning the machine.z Do not use tissue paper, paper towels, or similar materials for cleaning. Paper tissue powders or finethreads may remain inside the machine and cause problems such as a blocked Print Head and poorprinting results. Use a soft cloth to avoid scratching the components.z Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to cleanthe machine; these can damage the machine’s components.ImportantThe sheet (B) is easily damaged, so wipe it gently.NoteMake sure that the Inner Cover is closed.(B)(A)
