CHAPTER 1 GENERAL DESCRIPTIONCOPYRIGHT © 1999 CANON INC. CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-113. Cleaning the Corona Assembly1) Grip the handles on both sides of the front door, and open the front door.3-1. Cleaning Using the Corona Assembly Cleaner1) Grip the tab on the end of the corona assembly cleaner, and slide the corona assembly cleanerout toward you. Then, slide the corona assembly cleaner back into the copier.Repeat this motion several times.When you finish, slide the corona assembly cleaner back into the copier to its original position.3-2. Cleaning the Static Eliminator1) Turn the transport area release lever (green) to the left. Push slightly downward on the end ofthe static eliminator, and slide it out of the copier.2) After removing the static eliminator, turn it so that the bottom is facing upward. Slide the graytab on the bottom of the static eliminator back and forth from one end to the other several times.3) When you finish, insert the static eliminator back into the copier, and return it to its originalposition.4) Return the transport area release lever to its original position. Close the front door.
