CHAPTER 8 INSTALLATIONCOPYRIGHT © 1999 CANON INC. CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 8-9Size297mm×420mm(11.7"×16.5")279.4mm×431.8mm(11"×17")210mm×297mm(8.3"×11.7")216mm×279mm(8.5"×11.0")203mm×267mm(8"×10.5")190mm×265mm(7.5"×10.4")257mm×364mm(10.1"×14.3")216mm×356mm(8.5"×14.0")182mm×257mm(7.2"×10.1")220mm×280mm(8.7"×11.0")297mm×210mm(11.7"×8.3")279mm×216mm11.0"×8.5")257mm×182mm(10.1"×7.2")220m×340mm(8.7"×13.4")267mm×203mm(10.5"×8.0")203mm×330mm(8.0"×13.0")280mm×220mm(11.0"×8.7")216mm×330mm(8.5"×13")210mm×330mm(8.1"×13.3")206mm×337mm(8.1"×13.3")265mm×190mm(10.4"×7.5")216mm×317mm(8.5"×12.5")220mm×320mm(8.0"×12.6")216mm×355mm(8.5"×14.0")Copy paperA311x17A4LetterGovernmentLetterKoreanB4LegalB5ArgentineLetterA4-RLetter-RB5RArgentineLegalGovernmentLetter-RGovernmentLegalArgentineLetter-RFoolscapFolioAustralianFoolscapKorean-ROfficioEcuadoreanOfficioBolivianOfficioRear stopplateA311×17A4LTRG.K.B4LGLB5Arg.A4 RLTR RB5 RArg.LGLG. RG.LGLArg. RFLSFOLIOAus.FLSK. ROFCE.BLVIII. SETTING THECASSETTE SIZEThe copier’s cassette may be modified tosuit the desired paper size by modifying therear stop plate, spring, and face plate.A. Modifying the CassetteSize1) Turn over the cassette, and remove thescrew that holds the rear stop plate inplace.Note:For the following, use two rear stopplates; note the index on the bottom ofthe cassette: B4, A4-R, LGL, ARG-R,11×17, LTR-R.FLS, G.R, FOLIO,G.LGL, AUS. FLS, BLV., ARG.LGL,E., OFCFigure 8-3012) Change the rear stop plate to suit the de-sired paper size; note the index on the bot-tom, and see Table 8-301.Table 8-301ScrewBottom of cassette
