A Message Is DisplayedThis section describes some of the errors or messages.NoteA Support Code (error number) is displayed on the computer or on the LCD for some error ormessage. For details on errors with Support Codes, refer to Support Code List.If a message is displayed on the LCD, see below.• A Message Is Displayed on the LCDIf a message is displayed on the computer, see below.• Error Regarding Automatic Duplex Printing Is Displayed• The Inkjet Printer/Scanner/Fax Extended Survey Program Icon AppearsA Message Is Displayed on the LCDConfirm the message and take an appropriate action.• Data of supported types are not saved.• There is no image data or document saved on the USB flash drive that can be read by thismachine.• The machine may not recognize the file if the file name or folder path contain certain characters.Use only alphanumeric characters.• Photo data edited or processed on a computer must be printed from the computer.NoteWhen a photo which has been processed on a computer is selected, "?" is displayed on the LCD.• Cannot print the specified PDF file. An error has occurred while scanningthe file, or the format is not supported, or the file is too large.• Make sure the PDF file is printable from a USB flash drive. See Printing Documents (PDF File)Saved on a USB Flash Drive for more information.NoteThe names of the PDF files are displayed even though they cannot be printed from the USBflash drive. It is recommended you confirm whether they are printable. If one of the followingconditions applies to the PDF files, they are not printable.The Details screen is not displayed for the PDF file you want to print.Characters other than machine name, IJ Scan Utility, or My Image Garden aredisplayed on Created with on the Details screen."?" is displayed on the preview screen.• Data edited or processed on a computer must be printed from the computer.• The specified PDF file contains unprintable data. Some portions may notbe printed.PDF file which contain lot of graphics or hi-resolution images may lose that data or stop before printingis completed. In this case, print from the computer.• Check the page size and select .The size of the loaded paper is different from that specified in the paper size setting.Load the same size of paper as that specified in the paper size setting, then press the OK button.• Power was not turned off correctly the last time. Press the buttonwhen turning power off.The power cord may have been unplugged last while the machine was still on.Press the OK button to dismiss the error.