Canon MX720 Series Online Manual

Also see for MX720 Series: Online manual Setup guide Online manual Online manual Setup

Contents

Canon MX720 Series Online Manual Manual pdf 117 page image

Printing Does Not Start• Check 1: Is Bluetooth unit ready for use?Make sure that the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD) screen can bedisplayed on the LCD of the printer. If the screen cannot be displayed, remove the Bluetooth unit fromthe printer and attach it once again.Attaching to and Removing from the PrinterMake sure that the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD) screen can bedisplayed on the LCD of the printer, and try to print again.If the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD) screen is not yet displayedafter you remove the Bluetooth unit from the printer and attach it again, the Bluetooth unit may befaulty. In this case, contact the service center.• Check 2: Is there a problem with the location of the printer or is thedistance between the printer and computer too great?The maximum communication distance between the printer and a computer is about 33 ft./10 m, but itvaries depending on the following conditions:• Presence of obstacles between the communication equipment and radio wave conditions• Location where magnetic fields, static electricity, or radio interference occurs• Type of software and operating system used• Receiver sensitivity and antenna performance of the communication equipmentChange the printer installation place or move the printer closer to the computer.• Check 3: Is the printer to be used selected correctly?Follow the procedure described below to select the printer to which the Bluetooth unit is attached.1. Select Print from the File menu of the application software to open the Print dialog.2. Select the name of the printer to which the Bluetooth unit is attached from the Printer pop-upmenu.