Canon MX720 Series Online Manual

Also see for MX720 Series: Online manual Setup guide Online manual Online manual Setup

Contents

Canon MX720 Series Online Manual Manual pdf 104 page image

• Check 3: Is the sender's original document or scanning area of the sender's faxmachine dirty?The image quality of the fax is mainly determined by the sender's fax machine. Contact the sender andask the sender to check whether the scanning area of the fax machine is dirty.• Check 4: Is ECM transmission/reception enabled although the line/connection is poor,or is the sender's fax machine compatible with ECM?• Select ON for ECM RX in Adv. communication settings in Advanced FAX settings under FAXsettings.Advanced FAX settings• Contact the sender and ask the sender to check whether the machine is set to enable ECMtransmission.If the sender's or recipient's fax machine is not compatible with ECM, the fax will be sent/receivedwithout automatic error correction.• Reduce the reception start speed on RX start speed in Adv. communication settings inAdvanced FAX settings under FAX settings.Advanced FAX settings• Check 5: Did you confirm the paper and print quality settings?Print Results Not SatisfactoryCannot Receive a Color Fax• Check: Is ECM RX set to OFF?If OFF is select for ECM RX in Adv. communication settings in Advanced FAX settings under FAXsettings, the machine cannot receive color faxes. The machine will disconnect the telephone line orreceive color faxes in black & white according to the setting of the sender's fax machine.Set ECM RX to ON.Advanced FAX settingsErrors Often Occur When You Receive a Fax• Check 1: Check the telephone line condition or the connection.If the telephone line or connection is poor, reducing the reception start speed may correct the error.Reduce the reception start speed on RX start speed in Adv. communication settings in AdvancedFAX settings under FAX settings.Advanced FAX settings• Check 2: Is the sender's fax machine operating normally?Contact the sender and ask the sender to check whether the fax machine is operating normally.