Advanced Guide TroubleshootingContents > Copying > Copying PhotosCopying PhotosThis section describes the basic operation to copy photos.You need to prepare:Printed photos.Paper for printing. See Media Types You Can Use .1. Prepare for copying a photo.(1) Turn on the power.See Operation Panel .(2) Load paper.See Loading Paper .(3) Open the Paper Output Tray gently, and open the Output Tray Extension.(4) Load a photo on the Platen Glass.See Loading Originals to Copy or Scan .2. Start copying.(1) Press the [+] button repeatedly to specify the number of copies.See Start copying. .(2) Press the Paper button repeatedly to specify the page size and media type.The Paper lamp indicates the selected page size and media type.A4 or 8.5" x 11" Photo Paper / 4" x 6" Photo PaperNoteYou can switch the size of paper loaded in the Rear Tray between A4 and 8.5" x 11"(Letter) regardless of the size indicated on the Operation Panel.See Switching the Page Size between A4 or 8.5" x 11" (Letter) .When the Fit-to-Page copy function is enabled, you can copy an original in the sizeautomatically enlarged or reduced to fit the selected page size. In this case, the original iscopied with borders on the plain paper and without borders on the photo paper.Cancel the Fit-to-Page copy function to copy an original in the same size.See Fit-to-Page Copying .(3) Press the Color button for color copying, or the Black button for black & whitePage 29 of 628 pagesCopying Photos