Canon MP360 SERIES On-screen Manual

Canon MP360 SERIES On-screen Manual Manual pdf 28 page image

remaining number of copies to be made.To make 10 to 19 copiesThe paper-out error will occur ("E, 2" appears on the LED) when all of the loaded paper has been used toprint. Press the Stop/Reset button to release the error.NoteYou can set the print quality to "Fast" only when A4 or Letter-sized plain paper is selectedfor the page size and media type.To set the print quality to "Fast"(1) Press and hold down the Color or Black button for 2 or more seconds.The LED flashes once.* When you press the Color or Black button for less than 2 seconds, the machine startscopying in the print quality "Standard".(2) Release the button.The machine starts copying.When the print quality is set to "Fast", print speed is given priority over quality. To givepriority to quality, copy in the print quality "Standard".ImportantDo not open the Document Cover or move the loaded original until copying is completed.NoteTo cancel copying, press the Stop/Reset button.Switching the Page Size between A4 or 8.5" x 11" (Letter)You can switch the size of paper loaded in the Rear Tray between A4 and 8.5" x 11" (Letter).This setting is useful if you usually load Letter-sized paper in the Rear Tray regardless of the page sizeindication "A4" on the Operation Panel, and vice versa.1. Press the (Maintenance) button repeatedly until d appears.2. Press the Black button to select A4, or the Color button to select 8.5" x 11" (Letter).NoteWhen you switch the page size to A4 or 8.5" x 11" (Letter), load paper of the selected sizeregardless of the size indicated on the Operation Panel.- When the page size is set to A4: A4 Plain Paper / A4 Photo Paper- When the page size is set to 8.5" x 11" (Letter): 8.5" x 11" Plain Paper / 8.5" x 11" PhotoPaperPage topPage 28 of 628 pagesCopying Documents