Canon MP360 SERIES On-screen Manual

Canon MP360 SERIES On-screen Manual Manual pdf 27 page image

(2) Load paper.See Loading Paper .(3) Open the Paper Output Tray gently, and open the Output Tray Extension.(4) Load an original on the Platen Glass.Load the original with the side to copy facing down and align it with the alignment mark as shown below.See Loading Originals to Copy or Scan .2. Start copying.(1) Press the [+] button repeatedly to specify the number of copies (max. 20copies).To make 1 to 9 copies or 20 copiesDisplay the desired number of copies on the LED.Each time you press the [ +] button, the number on the LED increases by one. When F appears, the numberof copies is set to "20". Press the [ +] button again to return to "1".To make 10 to 19 copies(1) Display F on the LED.(2) Load only the desired number of sheets to copy in the Rear Tray.(2) Press the Paper button repeatedly to specify the page size and media type.The Paper lamp indicates the selected page size and media type.A4 or 8.5" x 11" Plain Paper / A4 or 8.5" x 11" Photo Paper / 4" x 6" Photo PaperNoteYou can switch the size of paper loaded in the Rear Tray between A4 and 8.5" x 11"(Letter) regardless of the size indicated on the Operation Panel.See Switching the Page Size between A4 or 8.5" x 11" (Letter) .When the Fit-to-Page copy function is enabled, you can copy an original in the sizeautomatically enlarged or reduced to fit the selected page size. In this case, the original iscopied with borders on the plain paper and without borders on the photopaper.Cancel the Fit-to-Page copy function to copy an original in the same size.See Fit-to-Page Copying .(3) Press the Color button for color copying, or the Black button for black & whitecopying.The machine starts copying.While copying is in progress, the number on the LED is flashing and reduced by one to indicate thePage 27 of 628 pagesCopying Documents