Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Changing the WPA orWPA2 Detailed SettingsN014Changing the WPA or WPA2 Detailed SettingsTo change the wireless network settings of the printer, connect the printer and the computer with a USBcable temporarily. If you modify the wireless network settings of the computer over wireless connectionwithout USB connection, your computer may not be able to communicate with the machine aftermodifying the settings.The example screenshots in this section refer to the WPA detailed settings.1. Start up the Canon IJ Network Tool.Starting up Canon IJ Network Tool2. Select the printer in Printers.3. Select Configuration from the Settings menu.4. Click the Wireless LAN tab.5. Select Use WPA or Use WPA2 in Encryption Method and click Configuration.Go to step 7 if encryption is not set to the printer.6. Click Change Settings.1. Authentication TypeDisplays the type of authentication used for client authentication.This machine supports the PSK authentication method.2. Dynamic Encryption TypeDisplays the dynamic encryption method as either TKIP (Basic Encryption), or AES (SecureEncryption).3. Change SettingsDisplays a dialog box to change WPA or WPA2 settings.7. Check the client authentication type and click Next.Page 989 of 1037 pagesChanging the WPA or WPA2 Detailed SettingsDownloaded from ManualsPrinter.com Manuals
