Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Printing Out NetworkSetting InformationN022Printing Out Network Setting InformationYou can print out the network settings of the machine such as its IP address and SSID.ImportantThis print out contains valuable information about your computer. Handle it with care.1. Make sure that the machine is turned on.2. Load a sheet of A4 or Letter-sized plain paper.Refer to Loading Paper / Originals .3. Select Setup on the HOME screen.NoteFor details on how to select a menu on the HOME screen, refer to Overview of the Machine.4. Select Device settings, then use the OK button to confirm the selection.5. Use the button to select LAN settings, then use the OK button to confirm theselection.6. Use the button to select Confirm LAN settings, then use the OK button toconfirm the selection.7. Use the button to select Print LAN details, then use the OK button to confirm theselection.8. Use the button to select Yes, then use the OK button to start printing.The following information on the machine's network setting is printed out.For MG6100 series/MG8100 seriesItem Explanations of the item SettingWireless LAN Wireless LAN Enable/DisableLink Status Status of the Wireless LAN Active/InactiveMAC Address MAC Address XX:XX:XX:XX:XX:XXSSID SSID SSID of the wireless LANConnection Mode Connection Mode InfrastructureChannel Channel XX (1 to 13)Encryption Method of the Encryption none/WEP/TKIP/AESWEP Key Length WEP Key Length Inactive/128/64Authentication Method of the Authentication none/auto/open/shared/WPA-PSK/WPA2-PSKPage 997 of 1037 pagesPrinting Out Network Setting InformationDownloaded from ManualsPrinter.com Manuals
