Specify the printer WEP settings. When changing the password (WEP key), the same change mustbe made to the password (WEP key) of the access point.1. WEP KeyEnter the same key as the one set to the access point.The number of characters and character type that can be entered differ depending on the keylength and key format.Key Length64 bit 128 bitKey Format ASCII 5 characters 13 charactersHexadecimal (Hex) 10 digits 26 digits2. Key LengthSelect either 64 bit or 128 bit.3. Key FormatSelect either ASCII or Hex.4. Key IDSelect the Key ID (index) set to the access point.5. AuthenticationSelect the authentication method to authenticate the printer's access to the access point.Normally, select Auto. If you want to specify the method manually, select Open System orShared Key according to the setting of the access point.ImportantIf the printer cannot communicate with the computer after the encryption type of the printerwas switched, make sure that encryption types for the computer and the access pointmatches that set to the printer.How to Set a WEP/WPA/WPA2 KeyPage topPage 988 of 1037 pagesChanging the Settings in the Wireless LAN SheetDownloaded from ManualsPrinter.com Manuals
