Canon MG3600 series Online Manual

Also see for MG3600 series: Online manual Getting started Getting started Getting started Getting started

Contents

Canon MG3600 series Online Manual Manual pdf 511 page image

Cannot Find Machine on Wireless LANCheck1 Make sure machine is turned on.Check2 Make sure Wi-Fi lamp is lit on machine.If the Wi-Fi lamp is off, the wireless LAN is disabled. Follow the procedure below to enable the wireless LAN.1. Press and hold Wi-Fi button and release it when ON lamp flashes.2. Press Color button, Black button, and then Wi-Fi button in this order.When the ON lamp changed from flashing to lit and the Wi-Fi lamp lights up, and then the wireless LAN isenabled.Check3 If machine is temporarily connected to computer via USB cable, make sureUSB cable is connected properly.If you set up the wireless LAN connection or change the wireless LAN settings using IJ Network Tool over a USBconnection, connect the machine and the computer using a USB cable as the illustration below. The USB port isat the back of the machine.Check4 Make sure machine setup is complete.If it is not, perform setup.• For Windows:Use the Setup CD-ROM or follow the instructions on the Canon website.• For Mac OS:Follow the instructions on the Canon website.Check5 If using IJ Network Tool, look for machine again.• For Windows:Canon IJ Network Tool Screen• For Mac OS:Canon IJ Network Tool Screen511