Using Machine with Access Point ModeAccess point mode allows you to print or scan by connecting the machine to a device such as a computer,smartphone, or tablet via wireless connection in an environment where a wireless router is not available. Inaddition, you can connect the machine to a device without a wireless router even where it is available.This section describes how to enable the access point mode, the access point name (SSID) of the machine,and the security setting.Enabling Access Point ModePrinting/Scanning with Access Point ModeTerminating Access Point ModeAccess Point Mode SettingImportant• Before using the machine with the access point mode, check the usage restrictions and switch themachine to the access point mode.Restrictions• If you use the machine with the access point mode for a long time, we recommend you change thedefault password to the combination of numbers and letters from the point of view of security.Enabling Access Point ModeEnable the access point mode following the procedure below.1. Make sure machine is turned on.2. Press and hold Wi-Fi button and release it when ON lamp flashes.3. Press Black button, Color button, and then Wi-Fi button in this order.The ON lamp changed from flashing to lit and the access point mode is enabled.Note• To check the machine's MAC address and serial number, and the current access point modesettings, print out the network setting information.Printing Network Settings• You can specify the security setting optionally.Access Point Mode SettingPrinting/Scanning with Access Point ModeSpecify the device settings, connect the device to the machine, and then start printing/scanning followingthe procedure below.Note• Before connecting a device, we recommended you check the access point name (SSID) and thepassword for the access point mode.393
