Setting the Administrator PasswordYou can specify or disable the administrator password.Specifying the administrator password requires you to enter the password to change the machine settings orconnection settings.Entering the administrator password is required to change the setting items in the following menus.• ECO settings• Quiet setting• Web service setup• FAX settings• LAN settings• Device user settings• Language selection• Firmware update• Administrator password setting• Operation restrictions• Reset settingFollow the procedure below to specify the administrator password.1. Make sure that the machine is turned on.2. Select Setup on the HOME screen.LCD and Operation Panel3. Select Device settings, then press the OK button.4. Use the button to select Administrator password setting, then press the OK button.5. When the confirmation screen to specify the administrator password is displayed, thenselect Yes and press the OK button.6. Check the message, then press the OK button.7. Select the range where the administrator password is valid.Remote UI/Network ToolEntering the administrator password is required to change the setting items using the Remote UI orIJ Network Tool.LCD/Remote UI/Network ToolEntering the administrator password is required to change the setting items using the operationpanel of the machine, the Remote UI, or IJ Network Tool.373Downloaded from ManualsPrinter.com Manuals
