• In Windows 8.1 or Windows 8, select Control Panel from the Settings charm on Desktop >Hardware and Sound > Device Manager.• In Windows 7 or Windows Vista, click Control Panel, Hardware and Sound, then Device Manager.• In Windows XP, click Control Panel, Performance and Maintenance, System, then click DeviceManager on the Hardware sheet.2. Double-click Universal Serial Bus controllers then USB Printing Support.If the USB Printing Support Properties screen is not displayed, make sure that the machine is correctlyconnected to the computer.Check3 Make sure that the machine is connected to your computer properly.3. Click the General tab and make sure that there is no indication of a problem with the device.If a device error is displayed, refer to Windows help to resolve the error.Other Error MessagesCheck If an error message is displayed outside the printer status monitor, check thefollowing:• "Could not spool successfully due to insufficient disk space"Delete any unnecessary files to increase the amount of free space on the disk.• "Could not spool successfully due to insufficient memory"Quit other running application softwares to increase available memory.If you cannot print yet, restart your computer and retry printing.• "Printer driver could not be found"Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers, thenreinstall the MP Drivers with the Setup CD-ROM or reinstall them from our website.• "Could not print Application name - File name"Try printing again once the current job is complete.The Inkjet Printer/Scanner/Fax Extended Survey Program Screen IsDisplayedIf the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, a confirmation screen asking forpermission to send the printer and application software usage information will be displayed every monthfor about ten years.Read the instructions on the screen and follow the procedure below.1005Downloaded from ManualsPrinter.com Manuals
