Chapter 33-363.1.17.11 Removing the Plate 0006-30471) Remove the connector [1] of the DCNT board.2) Remove the three screws [2] and then removes theplate [3].F-3-1543.1.17.12 Removing the PowerSupply Shield Plate 0003-75411) Remove the five screws [1] to remove the powersupply shield plate [2].F-3-1553.1.17.13 Removing the PaperDelivery Sensor 0006-30501) Remove the connector [1] on the DCNT board andtake the cable off the cable guide.2) Remove the screw [2] and remove the paperdelivery sensor [3].F-3-1563.1.18 Paper Full Sensor3.1.18.1 Removing the Cassette 0002-76741) Remove the cassette by holding the cassette handle.3.1.18.2 Removing the ReaderRight Front Cover 0002-76771) Open the platen glass cover [1].2) Open the front cover [2], remove one screw [3], andremove the reader right front cover [4].F-3-157[1][2][3][1][2][2][1][3][1][4][3][2]
