Chapter 33-842) Remove the spring [1].3) While freeing the claw, detach the tooth-missinggear [2].F-3-3613.5.4.20 Removing the DCNTBoard 0006-36841) Take off the connectors at seven spots (six if theunit is not equipped with the fax function) [1] aswell as the flat cable at three spots [2].2) Remove the three screws [3] and, while carefullywatching the sensor flag, removes the DCNT board[4].F-3-3623.5.4.21 Removing the ManualStay 0002-71501) Remove the three screws [1]. While watching thesensor flag carefully, remove the manual stay [2].F-3-3633.5.4.22 Removing the PaperFeed Guide 0002-71021) Remove the screw [1], and detach the paper feedguide [2].F-3-3643.5.4.23 Removing the PaperFeed Roller 0002-71041) Lift the left side of the paper feed roller [1], andslide it to detach.F-3-365[2] [1][1][1][2][2][3][3][3][4][1][1][2][1] [2][1]
