Canon LIDE200 User Manual

Also see for CANOSCAN LIDE 200: Brochure Quick start guide Brochure & specs Quick start guide

Contents

Canon LIDE200 User Manual Manual pdf 223 page image

On-Screen Manual > Scanning Guide > Other Scanning Methods > Scanning from an ApplicationScanning from an ApplicationYou can scan an image from a TWAIN- or WIA-compliant application and use the image in thatapplication.The procedure varies depending on the application. The following procedures are examples only.For details, refer to the application's manual.ImportantIn Windows 2000, you cannot scan using the WIA driver.Scanning from a TWAIN-compliant applicationThe following is an example of scanning using ArcSoft PhotoStudio.1. Place the document on the Platen.Placing Documents2. From the Start menu, select (All) Programs > ArcSoft PhotoStudio 5.5 >PhotoStudio 5.5.The ScanGear (scanner driver) screen appears.3. From the File menu, select Select Source.In the Select Source screen, select the machine and click Selection.4. From the File menu, select Import.ScanGear (scanner driver) starts.For details on how to scan using ScanGear (scanner driver), see " Scanning in Basic Mode ."Scanning from a WIA driver 2.0-compliant applicationThe following is an example of scanning using Windows Photo Gallery.1. Place the document on the Platen.Placing Documents2. In File, click From Scanner or Camera..., then double-click WIA CanoScan (modelname).The scan setting screen appears.3. Specify the settings.Sayfa 223 / 268 sayfaScanning from an Application