Chapter 22-152.3.5 Stack Delivery Operation 0009-2517The stack is ejected each time three large size sheets*1 or five small size sheets*2 are offset on the processing tray.The swing motor turns and the swing guide descends. This causes the upper/lower stack delivery rollers to hold thestack. The stack delivery motor turns the stack delivery roller and return roller. At the same time, the rear end assistguide is started by the rear end assist motor and the stack held by the stack delivery rollers is delivered in the ejectiondirection. The rear end assist guide stops once it reaches the prescribed position and returns to home position whenthe rear end assist motor is reversed. Then the stack delivery motor starts and ejects the stack with the upper/lowerstack delivery rollers.F-2-20*1 Varies from 1 to 4 sheets depending on the number of original. (ex: When the number of original is 10, copy stackare ejected in the order of 3 sheets, 3 sheets and 4 sheets.) In case for the thick paper, copy stack always consists of2 sheets.*2 Varies from 1 to 6 sheets depending on the number of original. (ex: When the number of original is 7, copy stackare ejected in the order of 5 sheets and 2 sheets.)Return rollerStack ejection roolerRear end assist guideSwing guide
