Chapter 55-105.3.11 E584 0009-2692T-5-145.3.12 Temporary Functional Limit 0009-26931. OverviewThe machine has a feature to temporarily enter the limited operation mode to perform onlypaper delivery, when an error is encountered. The machine can continue to operate in thislimited mode until the error is removed.In the limited operation mode, stapling, alignment, and punching (only applicable whenequipped with optional puncher unit) are not performed, while the inlet sensor (PI103),escape tray path sensor (PI118), and feed path sensor (PI104) remain enabled to detect anyjam.2. Operation1) When the host machine has started up, use service mode or user mode as follows:1-a) Service ModeSet '1' for the following: SORTER>OPTION>MD-SPRTN.1-b) User ModePress [limit function mode]; when a Confirmation screen has appeared, press [yes].3) Turn off and then on the main power switch of the host machine.3. Communication with the Host MachineCode Detail Error Description Detection timingE584 8001 Stack ejectionmotor (M102)/Shutter open/close clutch(CL101)/Shutterhome positionsensor (PI113)/Stack ejectionlower rollerclutch (CL102)The stapler does not leave the shutter homeposition when the stack ejection motor has beendriven for 3 seconds.0002 The stapler does not return to the shutter homeposition when the stack ejection motor has beendriven for 3 seconds.
