68Registrating and Switching AF PointBy registering the AF point you often use, you can switch to it instantly. You can register an off-center AF point which suits your preferred framing or automatic selection for the picture-takingmoment priority. Any of the 45 AF points can be registered. Only one AF point can be regis-tered.Registering an AF PointPress the < > button which remainsactive for ( ). Then turn the < > or< > dial to select the AF point to beregistered.1While pressing the < > button, pressthe < > button.s This registers the selected AF point.• When the AF point is registered, the LCD paneldisplay will differ depending on the selected AFpoint. The same display will also appear when theregistered AF point is selected.2Automatic selection Off-center AF point Center AF point• An AF point can be registered even when C.Fn-13-1/2 has been set to limit theselectable AF points to 11. (→p.66)• When C.Fn-13-3 has been used to limit the selectable AF points to 9, an AF pointcannot be registered. (→p.66)• “SEL” stands for Select, and “HP” stands for “Home Position.”When using a Speedlite and spot metering, first press the < > button. If you pressthe < > button first, the AF point selection will be canceled.
