117Playback Images7Playback Images• If you playback images and then go away without operating or turning off thecamera, the LCD monitor will turn off automatically after half of the auto power-offtime elapses. If the auto power-off function has been disabled, the image displaywill turn off automatically after 15 minutes.• You can playback all the images in the current folder. To playback images inanother folder, you must first select that folder (see step 1 on page 55).• In any display format, you can protect the image (→p.119) or create a soundrecording(→p.121).P.Fn-30 Enlarging the imageWhen P.Fn-30’s “Enlargement mode” is ON, you can view an enlarged portion of the image.For details, see “EOS DIGITAL Software User’s Manual.”To enable this feature, set P.Fn-30 to ON for both shooting and playback. If P.Fn-30 is not ONduring shooting, the image cannot be enlarged on the LCD monitor.Playback the image and select theimage to be enlarged. (→p.116)• The image to be enlarged can be in any displayformat.1Enlarging the image.• Hold down the < >, then press < >. Be sureto hold down the < > button first.s The image will be enlarged.2Scroll around the image.• Press the < > button.s In the bottom right corner, the little box in thereference image shows where you are currentlyviewing.• While pressing the < >button, turn the < >dial to scroll around the image to see anothermagnified portion. Then let go of the < >button.s The portion within the little box will be enlarged onthe LCD monitor.3While one image is enlarged, you cannot switch to another image. Press the< > button to cancel the image enlargement, then proceed from step 1 .➡BoxReference image
