100Self-timer OperationDrive Modes Selection/ Self-timer Operation• When you take a picture, the image is first stored in the camera’s internal memoryand then transferred to the CF card. When the internal memory becomes fullduring continuous shooting, the camera cannot continue to take more picturesuntil the images are transferred to the CF card and the internal memory gainsome space. During continuous shooting, check the maximum burst countdisplayed in the viewfinder on the lower right corner. This is the number ofcontinuous shots that you can take before the camera must stop to transfer theimages to the CF card. This number is displayed even when a CF card is not inthe camera. Make sure that a CF card is loaded before taking a picture.• When “ ” is displayed in the viewfinder and on the top LCD panel, replacethe CF card after the access lamp stops blinking.C.Fn-01 enables the viewfinder information to be displayed during continuousshooting. (→p.133)The self-timer can be set to either a 2-second or 10-second delay. When using the self-timer,you should mount the camera on a tripod.While pressing the < > button and< > button, turn the < > dial andset the desired self-timer delay time.1 : 10-second delay: 2-second delayLook through the viewfinder and pressthe shutter button halfway to focus.• Check that the focus confirmation light < > andexposure setting are displayed.2
