CLC 5100/4000 Service GuideI. Product OverviewThe CLC 5100 is the successor model of the CLC 5000/5000+ with print speeds ofup to 51 ppm. The CLC 4000 replaces the CLC 3900/3900+ with up to 40 ppm.Built with the same proven architecture as the CLC 5000, both models offer highspeed, high image quality, and stable performance, which help to attain lowerrunning costs. These models incorporate improved capabilities that result inoutstanding image quality, color consistency, enhanced performance, andproductivity. Two new ColorPASS controllers are also available as described onPage 9.A. New Design Features• Faster output speed for heavier media• Better color consistency compared to previous models• Buffer Pass Unit (Standard)• New large Side Paper Deck-R1 (Standard)o Coated paper can be used with the Side Paper Deck-R1• Offset Staker-B1 (Option available at a later date)• Staple Sorter (Option available at a later date)B. Other Features• New external front cover design• Auto Duplex from Paper Deck on media up to 163 gsm• Dual Control Panel option to comply with the 508 Disability Act• Wider Image Area• Stack-less duplex capability• Scan Once Print Many without compression• Stapler Sorter cascading function (Option available at a later date)• Finer, Brighter (FB) Toner• Wide Color Space• 800 x 400 dpi with Automatic Image Refinement• Dual Automatic Toner Replenishment• 11” x 17” full bleed on 12” x 18” paperC. Side Paper Deck-R1The new Side Paper Deck-R1 (standard) has the new “air assist” technologyto help feed a variety of media by blowing air to lift the media into the paperfeed. Heat is applied to the coated media leading edge to dry any moisturethat may have been absorbed in humid conditions.The new “air assist” technology is only one of several new technologiesintegrated into the design of these new CLC products.CLC 5100/4000 Service Guide Rev. 0 October 2003 Page 1