Lowering the Density setting1. From the File menu, select Print.2. In the Print dialog box, click the (Manual) icon then click theDetails button.3. In the Detailed Setting dialog box, click the Colour icon.4. Drag the button on the Density slide bar to the left to reduce theamount of ink used in the print job.Battery is not chargingYou have been using the printer and you want to charge the battery butyou cannot proceed. The AC adapter is connected to the printer andplugged into a power outlet, but the CHARGE/ERROR lamp does notlight green.Executing a long print job?After prolonged use, the printer may heat up and not allow you torecharge the battery for about 30 minutes until the printer has cooled.Wait for the printer to cool, then try to charge the battery again.OtherMacintoshWindowsOtherMacintoshWindowsMacintosh135Chapter 6 Troubleshooting6
