Leading Edge Margin Adjustment (2nd side)1. Copy from the cassette, and check that the leading edge margin is L1 = 4.0 +1.5/-1.0mm. If the margin is not withinthe range, execute the adjustment by following the procedure below.L1imageFeeding directionof paperIn Case of Out of Range2. Select service mode > COPIER > ADJUST > FEED-ADJ > REG-DUP1.3. Make adjustment by changing the setting value. (As the setting value is incremented by 1, the leading edge marginis increased by 0.1 mm: the image moves to the trailing edge side.)4. Write the new adjustment value on the service label.• REG-DUP15. Adjustment62
