7. Return the cassettes to their original positions.NOTE:If you are concerned with the difference in level of the cassettes after mechanical adjustment, adjust it by loosening the 2screws.1x1x8. Copy from the cassette, and check that the left edge margin is within 2.5mm +/- 1.5mm.Cassette Left Edge Margin Adjustment (1st Side: SoftwareAdjustment)1. Copy from the cassette, and check that the left edge margin iswithin 2.5 +/- 1.5mm (in the case of LTR/LGL: 4.2 +/- 1.5 mm).Feeding directionof paperL1image2. If the margin is not within the range, change the left edge margin adjustment value for the 1st side of the cassette.As the value of service mode > COPIER > ADJUST > FEED-ADJ > ADJ-C1 is increased by 1, the left edge margin is increasedby 0.1 mm. (The image moves to the right.)3. Copy from the cassette, and check that the left edge margin is within 2.5mm +/- 1.5mm.5. Adjustment60
