Canon AJ1 Service Manual

Contents

Canon AJ1 Service Manual Manual pdf 52 page image

3. Write the new adjustment value on the service label.• ADJ-C1Cassette Left Edge Margin Adjustment (2nd Side: SoftwareAdjustment)Execute duplex copy from the cassette, and check that the left edge margin on the 2nd side is within 2.5 +/- 2.0mm (in the caseof LTR/LGL: 4.2 +/- 2.0 mm). When it is out of the specified range, perform the following procedure.Feeding directionof paperL1image1. Change the left edge margin adjustment value for the 2nd side of the cassette.• Service mode > COPIER > ADJUST > FEED-ADJ > ADJ-C1REWhen the value is increased by 1, the left edge margin is increased by 0.1 mm. (The image moves to the right.)2. Execute duplex copy from the cassette, and check that the left edge margin is within 2.5 +/- 2.0mm.3. Write the new adjustment value on the service label.• ADJ-C1RELeading Edge Margin Adjustment (1st Side of Plain Paper)Copy from the cassette, and check that the leading edge margin is L1 = 4.0 +1.5/-1.0mm. When it is out of the specified range,perform the following procedure.1. Adjust the leading edge margin of the 1st side of the cassette.• Service mode > COPIER > ADJUST > FEED-ADJ > REGIST(As the setting value is incremented by 1, the leading edge margin is increased by 0.1 mm: the image moves to thetrailing edge side.)2. Copy from the cassette, and check that the leading edge margin is L1 = 4.0 +1.5/-1.0mm.3. Write the new adjustment value on the service label.• REGISTLeading Edge Margin Adjustment (2nd Side)Copy from the cassette, and check that the leading edge margin is L1 = 4.0 +1.5/-1.0mm. When it is out of the specified range,perform the following procedure.5. Adjustment47