■ When removing the Separation Roller1. Remove the Separation Roller [1].• 1 Claw [2][1][2]1xNOTE:How to install the Separation Roller.• Be sure to align the groove [A] of the coupling with the spring pin [3] of the shaft to install the roller.[3][A]• Be sure to align the grove [B] of the Separation Roller [1] with the protrusion [C] of the coupling to install the roller.• Be sure to hook the claw [2].[B][2]1x[1][C]Removing the Auto Close Unit■ Preparation1. “Removing the Rear Cover” on page 284. Disassembly/Assembly37
