Canon AJ1 Service Manual

Contents

Canon AJ1 Service Manual Manual pdf 15 page image

ControlsPaper inside a cassette is lifted up by the Lifter Plate.The Lifter Plate is lifted up by rotating the Cassette 2 Lifter Motor (M104). When the Cassette 2 Pickup Roller comes into contactwith the paper surface, the Cassette 2 Pickup Motor (M102) rotates to pick up the surface layer paper, and the Cassette 2 FeedRoller and Cassette 2 Separation Roller feed only 1 sheet of paper to the feed path. Then, it is moved to the Pre-registrationRoller by the rotation of the Cassette 2 Pullout Motor (M106).The Cassette 2 Pickup Roller, Cassette 2 Feed Roller, and Cassette 2 Separation Roller are driven by the Cassette 2 PickupMotor (M102) while the Cassette 2 Vertical Path Roller is operated by the rotation of the Cassette 2 Pullout Motor (M106).M102M106M104[1][2][4][3][5]PS104PS107No. Parts name[1] Cassette 2 Pickup Roller[2] Cassette 2 Vertical Path Roller[3] Cassette 2 Feed Roller[4] Cassette 2 Separation Roller[5] Cassette 2 Lifter PlatePaper Size Detection ControlThe paper size in the cassette is automatically detected by the Cassette 2 Size Detection Switch after the position of the GuidePlate is adjusted and the cassette is installed in the host machine.By shifting the Guide Plate, concavo-convex area of the Cassette Size Dial is switched and the Cassette Size Switch at the printerside is switched. The switch consists of 3 microswitches, and the length is detected in accordance with the combination ofON/OFF (ON when the switch is pressed). Any standard size paper of AB, inch, or AK configuration can be used. However,distinction between A5-R and STMT-R (*) should be made manually on the check screen. Distinction between EXEC-R and 16K-R and between LTR-R and 16K-R is automatically made according to the country setting.*: Whether to select A5-R or STMT-R can be registered in the user mode setting.[Settings/Registration] > [Preferences] > [Paper Settings] > [A5R/STMTP Paper Selection]Specify A5-R or STMT-R for each cassette.2. Technical Explanation10