Canon 800II Installation Manual

Also see for Microfilm Scanner 800II: Brochure & specs Brochure & specs Brochure & specs Instructions

Canon 800II Installation Manual Manual pdf 40 page image

Chapter 3 Using the Scanner406Scanning ends.The Start Scanning (Continue) dialog box appears.In Semi-Auto mode, the scanner’s Start key switches to the ready state.7To scan another image, project the image onto the scannerscreen and click [Continue Scanning]. To stop scanning, click[Stop Scanning].In Semi-auto mode, you can continue scanning simply by pressing the Startkey on the scanner. To stop scanning, press the Clear key. The Start Scan-ning (Continue) dialog box appears and scanning stops.If you are using the FS Controller III, you can perform continuous scan-ning from the FS Controller III keyboard. Refer to the FS Controller IIIInstructions for details.8Check the scanned images.The [View] menu and Toolbar buttons can be used to check the image.Fit to width: Matches the image width to the width of the window.Best Fit: Displays the entire page so that it fits in the window.Zoom In: Enlarges the image each time it is clicked. Once the image is displayed at 100%scale, this menu is grayed out and the image cannot be enlarged further.Zoom Out: Reduces the image each time it is clicked.Rotate Left: Rotates the image left (counterclockwise) by 90°.Rotate Right: Rotates the image right (clockwise) by 90°.Next page: Displays the image on the next page.(if TIFF is selected as the file format and multiple pages are scanned)Previous Page: Displays the image on the previous page.(if TIFF is selected as the file format and multiple pages are scanned)NOTENOTE