Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Reducing or Enlarginga CopyReducing or Enlarging a Copy1. Make sure that the machine is turned on.2. Load plain paper on the Rear Tray.3. Load the original document on to the Platen Glass.4. Press the Paper button to select Plain paper.NoteYou can switch the size of paper loaded on the Rear Tray between A4 and Letter. Switchingthe Page Size between A4 and Letter5. Press the Fit to Page button.The Fit to Page lamp lights up. To cancel the Fit to Page copying, press the Fit to Page button again.NoteYou can use the Fit to Page button only when you are using the copy function.Copied images are automatically reduced or enlarged in the lengthwise/widthwise direction tofit the page size you select.6. Press the + button repeatedly to specify the number of copies.NoteBy pressing the + button repeatedly, F will be displayed on the LED. The number of copies willbe set as 20.When you want to make 10 to 19 copies, specify the number of copies to 20, then load thesame number of pieces of paper. In this case, the machine will stop copying in an error. Pressthe Stop/Reset button to release the error.Pressing the Stop/Reset button returns the number of copies to 1.7. Press the Color button for color copying, or the Black button for black & whitecopying.The machine starts fit-to-page copying.To make high speed copies1. Hold down the Color or Black button for longer than 2 seconds.The LED flashes once.2. Release the button.The machine starts high speed copying.ImportantDo not open the Document Cover or remove the original from the Platen Glass until copying iscomplete.NoteHigh speed copying is suitable for printing text-only documents on plain paper. If the quality isnot as good as expected, try normal copying.When you want to make 10 to 19 copies, specify the number of copies to 20, then load thesame number of pieces of paper. In this case, the machine will stop copying in an error. PressPage 285 of 623 pagesReducing or Enlarging a Copy
