Camille Bauer SINEAX DM5000 Device Handbook

Also see for SINEAX AM3000: Operating instructions Operating instructions

Contents

Camille Bauer SINEAX DM5000 Device Handbook Manual pdf 7 page image

PM 1001484 000 08 Device handbook SINEAX DM5000 7/964. Mechanical mountingPlease ensure that the operating temperature limits are not exceeded when determining theplace of mounting (place of measurement).By installing, the device becomes part of an electrical power installation that must bedesigned, operated and maintained in accordance with country-specific regulations so thatthe installation is safe and provides prevention against fire and explosion as far as possible.It is the task of this installation to ensure that dangerous connections of the device can notbe touched during operation and that the spread of flames, heat and smoke from the interioris prevented. This may be done by providing an enclosure (e.g. case, cabinet) or using aroom accessible to qualified personal only and compliant with local fire safety standards.The standard version of the DM5000 can be clipped onto a top-hat rail according to EN60715. Orientationas shown.The device can also be mounted that the front of thedevice protrudes through a cut-out in the enclosure. Sothe operating buttons and the display become accessible.With centric mounting using the below maximum cut-out agap between enclosure and device results, which doesnot exceed 2.5mm on each side.