Cambium Networks PMP 450 Series User Manual

Also see for PMP 450d Series: User guide

Contents

Cambium Networks PMP 450 Series User Manual Manual pdf 90 page image

Chapter 2: System hardware CablingPage 2-29SFP module kitsSFP module kits allow connection of a PMP 450 Series ODU to a network over an Optical GigabitEthernet interface (1000BASE-LX or 1000BASE-SX) full-duplex mode.NotePMP 450m supports Fiber SFPs from system release 15.0.3.Order SFP module kits from Cambium Networks (Table 33).Table 33 SFP module kit part numbersCambium description Cambium part numberSingle Mode Optical SFP Interface per ODU C000065L008Multi-mode Optical SFP Interface per ODU C000065L009To compare the capabilities of the two optical SFP modules, refer to Table 34 and Table 35.Table 34 Single Mode Optical SFP Interface per ODU (part number C000065L008)Core/cladding(microns)Mode Bandwidth at1310 nm(MHz/km)Maximumlength of opticalinterfaceInsertion loss(dB)62.5/125 Multi 500 550 m (1800 ft) 1.6750/125 Multi 400 550 m (1800 ft) 0.0750/125 Multi 500 550 m (1800 ft) 1.1910/125 Single N/A 5000 m (16400 ft) 0.16Table 35 Multi-mode Optical SFP Interface per ODU (part number C000065L009)Core/cladding(microns)Mode Bandwidth at850 nm (MHz/km)Maximumlength of opticalinterfaceInsertion loss(dB)62.5/125 Multi 160 220 m (720 ft) 2.3862.5/125 Multi 200 275 m (900 ft) 2.650/125 Multi 400 500 m (1640 ft) 3.3750/125 Multi 500 550 m (1800 ft) 3.56The upgrade kits contain the following components: Optical SFP transceiver module (Figure 19)