2010 Barbecue GrillsLTR20101038, Rev. AInstallation / Assemblywww.calflamebbq.com10Installing Side BurnersAssemble a 3/8” pipe nipple to the 3/8” pipe1.tee using Teflon tape or pipe sealant. Use onlysealant that is approved for use on LP gas.Install the pipe tee assembly to the grill intake2.pipe. Tighten assembly and align the branchopening of the tee with the hole of the cabinet.Connect the flexible hose (male end) to the pipe3.tee.Install and secure the side burner into the island4.by simply setting it in place.Connect the female end of the flexible hose to5.the side burner intake pipe.Connect gas supply to the grill.6.Check for gas leaks using soap water solution.7.CBABCAConnect the last open line to the side burner(Use gas rated tape seal on all connections)Then take other end of "T" adapter with hose attachedand connect to end of male located underneath and atthe back of the grill. (Use gas rated tape seal on allconnections).Open barbecue door. Install hose with regulator on propanetank. Then connect other end to "T" adapter. Make sure touse gas rated tape seal when installing adapter to insureproper seal.GrillItems Included with Barbecue1) "T" adapter (3/8")2) 2 each Hose 3/8" Fittings3) Regulatorw/ HoseNOTE: You will need to use a gas ratedsealer on gas connectors that are not flared.To Propane Tank3/8" FittingsFrom Grill From Side Burner"T" Adapter (3/8" Threaded)To side burner, locatedunderneath behind burner.To grill, locatedunderneath andbehind grillGAS LINECBABCAConnect the last open line to the side burner(Use gas rated tape seal on all connections)Then take other end of "T" adapter with hose attachedand connect to end of male located underneath and atthe back of the grill. (Use gas rated tape seal on allconnections).Open barbecue door. Install hose with regulator on propanetank. Then connect other end to "T" adapter. Make sure touse gas rated tape seal when installing adapter to insureproper seal.GrillItems Included with Barbecue1) "T" adapter (3/8")2) 2 each Hose 3/8" Fittings3) Regulatorw/ HoseNOTE: You will need to use a gas ratedsealer on gas connectors that are not flared.To Propane Tank3/8" FittingsFrom Grill From Side Burner"T" Adapter (3/8" Threaded)To side burner, locatedunderneath behind burner.To grill, locatedunderneath andbehind grillGAS LINE