Black plate (62,1)Cadillac Escalade/Escalade ESV Owner Manual - 2010Using Universal Home RemotePress and hold the appropriate button for at least half ofa second. The indicator light will come on while thesignal is being transmitted.Reprogramming Universal HomeRemote ButtonsAny of the three buttons can be reprogrammed byrepeating the instructions.Erasing Universal Home RemoteButtonsThe programmed buttons should be erased when thevehicle is sold or the lease ends.To erase either Rolling Code or Fixed Code on theUniversal Home Remote device:1. Press and hold the two outside buttons at thesame time for approximately 20 seconds, until theindicator lights, located directly above the buttons,begin to blink rapidly.2. Once the indicator lights begin to blink, releaseboth buttons. The codes from all buttons will beerased.For help or information on the Universal Home RemoteSystem, call the customer assistance phone numberunder Customer Assistance Offices on page 9‑6.Storage AreasGlove BoxPull the bottom of the glove box handle upward to openit. Use the key to lock and unlock the glove box.CupholdersCupholders are located in the center console for thefront passengers. Press down on the access doorrelease to open and use the front cupholders. Push thedoor back down to close it. Push down and then backon the front cupholder to remove it for cleaning.Heated and Cooled CupholdersFor vehicles with heated and cooled cupholders, theseare located in the front center console.Press down on the access door release button to openthe cupholder door.3-62
