Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

MY22Z01 - 12_1.0_25.07.2022 80Assembly5.3.4.2 20 mm cross axleOnly applies to Suntour forks with thisequipment1 Insert the cross axle into the hub on the driveside.Figure 92: Inserting the cross axle in the direction of thearrow2 Tighten the cross axle with the red handle.Figure 93: Tighten the axle in the direction of the arrow3 Push red lever into the cross axle.Figure 94: Pushing the red lever in the direction of thearrow4 Closing the quick release lever.Figure 95: Pressing the quick release lever in the directionof the arrow The cross axle is secured.Crash caused by loose cross axleA faulty or incorrectly installed cross axle maybecome caught in the brake disc and block thewheel. This will cause a crash. Never fit a defective cross axle.Crash caused by faulty or incorrectlyinstalled cross axleThe brake disc becomes very hot duringoperation. Parts of the cross axle may becomedamaged as a result. The cross axle becomesloose. This will cause a crash with injuries. The cross axle and the brake disc must beopposite one another.Crash caused by incorrectly set cross axleInsufficient clamping force will result inunfavourable transmission of force. Thesuspension fork or the quick release axle maybreak. This will cause a crash with injuries. Never fasten the cross axle with a tool (e.g.hammer or pliers).CAUTION!