21enSafety instructions for this applianceW Risk of injuryW Risk of electric shockIf the power is interrupted, the appliance remains switched on andrestarts when the power is restored.Never immerse the base unit in liquids or place under running waterand do not clean in the dishwasher.Before rectifying a fault, pull out the mains plug.W Risk of injury from the rotating tools!While the appliance is operating, never place fingers in the mixingbowl. Always use the pusher for adding ingredients.After switching off, the drive continues running for a short time.Change tools only when the drive is at a standstill.W Risk of injury from sharp blades/rotating drive!Never reach into the attached blender jug!Do not remove/attach the blender jug until the drive has stopped. Donot remove/attach the universal cutter jug until the drive has stopped.W Risk of injury from sharp blades!Do not touch blades of the universal blade with bare hands. Whennot in use, always store the universal blade in the blade guard. Cleanthem with a brush.Do not grip the sharp blades or edges of the cutting discs. Grip thediscs by the plastic part in the centre only!Do not place fingers in the feed tube. Only use the pusher whenadding more ingredients. Do not touch blades of the blade insert withbare hands. Clean them with a brush.W Risk of scalding!If processing hot liquids, steam escapes through the funnel in the lid.Add a max. 0,4 litres of hot or frothing liquid.W Risk of injury!Never assemble accessories on the base unit.W Important!It is essential to clean the appliance thoroughly after each use orafter it has not been used for an extended period. X “Cleaning andservicing” see page 26Printed on 100% recycled paperImportant safety notices