LTC 8600 | LTC 8800 Series en | 45F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc.13 Video Monitor DisplayThe Allegiant Series systems feature an integral text overlay with two or three rowsof 24 characters each. There are over 2000 different characters that can be dis-played. See Chapter 20, “Character ROM Tables for LTC 8600 and LTC 8800,” onpage 86NOTE If no video signal is present, a new line will appear stating: VIDEO NOT PRESENT.The display is broken down into seven areas as shown in the figureFigure 18: Monitor Overlay DisplayNOTE The Monitor Overlay Display shows all six digits including leading zeros for a cameranumber in 6-digit mode. In 4 digit mode, the camera number display depends onthe setting of the Miscellaneous Parameter option as set in the Master Control Soft-ware.13.1 Time/DateThe time/date display is generated by the system CPU microprocessor module. It iscrystal controlled and battery protected for one year (minimum) without power. Thedisplay is updated once per second and all monitors update simultaneously. Thetime/date message is always on the right side of the video display with the time onthe top line. Time displays hours, minutes, and seconds, and can be set to either 12-hour or 24-hour operation. The date is available in three (3) user-selectable formats:1. U.S. Format - The order for the American date display is: MM/DD/YY.(Default for 120 VAC systems)2. International Format - The order for the international date display is:DD/MM/YY (Default for 220-240 VAC systems)3. Asian Format - The order for the Asian date display is: YY/MM/DDXXXX Status/Title 12:00:00Camera Title 11-26-90Extended Camera Title/Monitor TitlexxUser-selectable2-digit “Site”Number Mode12-character SystemStatus Display orMonitor TitleCameraNumber12- or 24-hourTime Display16-characterCamera TitleUser-selectableThird Line Mode3 SelectabFormats:(MM-DD-YDD-MM-YYY-MM-DPM
