Bosch CTL836E 6 Series Instruction Manual

43enInitial useF It is important to set the water hard-ness correctly to enable the appli-ance to accurately indicate when thedescaling programme should be run.The preset water hardness is level 4.If a water softener is installed in thehouse, please set the water hard-ness to level 3. You can also checkthe water hardness by asking yourlocal water supplier.■ Use the enclosed test strip to determinethe water hardness. Briefly dip the teststrip in water and check the result afterone minute�Level Water hardnessGerman (°dH) French (°fH)12341-78-1415-2122-301-1314-2526-3839-54■ Turn the control ring with you finger to setthe water hardness determined.■ [ Home Connect ] appears on the left andon the right [ Set-up complete]�■ To now connect the appliance to theWLAN network (home network), touch[ Home Connect ]�■ To connect the appliance to the WLANnetwork later on, touch [ Set-up complete]�The settings for Language and Waterhardness are saved�F When selecting [ Home Connect ]please read the detailed descriptionin the section “Home Connect”.The appliance is ready to use as soonas the drink symbols are shown and them lights up.The integrated fan switches on each timea drink is dispensed and switches off againafter a few minutes.When the appliance is used for the first timeafter running a service program, or if it hasnot been operated for a long period, the firstbeverage will not have the full aroma andshould not be consumed.When the fully automatic coffee machineis first used, a suitably thick and stable“crema” is only achieved after the first fewcups have been dispensed�Switch off appliance■ Press I�The appliance rinses and switches toenergy saving mode.Exception: If only hot water is dispensed,the appliance switches off without rinsing .■ To switch the appliance off completely,open the appliance door and set themains switch to h�F Important: Do not press the mainsswitch while the appliance is in use.Switch off the appliance only whenit is in energy saving mode, so it canrinse automatically.The factory settings of the fullyautomatic coffee machine are pro-grammed for optimal performance.The appliances switches automat-ically to the energy saving modeafter a configured time and rinses(duration can be set, see “Switch offafter” in the section “Menu”).The appliance is equipped with asensor. If there is a milk container,this will be correspondingly shownon the display when switching to theenergy saving mode. If there is milkin the container, please keep in thefridge�