Bosch AEC‑AMC2‑UL01 Installation Manual

Also see for AEC-AMC2-UL01: Installation manual

10 en | Mounting the enclosure AMC2 enclosure with 1DIN rail2020-07 | V04 | F.01U.330.018 Bosch Security Systems B.V.2 Mounting the enclosureThe enclosure is designed to be mounted on a wall.1. Open the door lock of the enclosure with the provided key.2. Hold the enclosure at the desired position against the wall.3. Mark the mounting holes on the wall with a pencil.4. Put the enclosure aside.5. Drill the holes at the points that you previously marked onthe wall.6. Insert the screw anchors in the drilled holes.7. Drive the screws halfway into the top and bottom left screwanchors.8. Hang the enclosure on the wall, according to the position ofthe screw anchors.9. Drive the third screw into the anchor on the bottom right.10. Tighten all screws.– The enclosure is installed.86,5 mm3,406 in401 mm15,787 in352,5 mm13,878 in5 mm0,197 in318 mm12,52 in10 mm0,394 in5 mm0,197 in10 mm0,394 in200,5 mm7,894 inFigure 2.1: Dimensions of the enclosure